Toilet Seat Cleaning: Stubborn stains on the toilet seat? Clean it without rubbing.
- bySherya
- 18 Nov, 2026
Toilet Seat: First, remove the toilet seat from its hinges. Detaching the seat provides easy access to the top and bottom, as well as the hinges and mounting points.

How to clean the toilet seat?
Washing Soda Toilet Cleaner: If the toilet seat has stubborn stains and dirt, there's no need to repeatedly scrub it clean. The toilet seat can be removed and soaked in a solution of warm water and washing soda for a few hours. This will loosen the accumulated dirt and stains, making it easier to clean later.
Remove the toilet seat first.
First, remove the toilet seat from its hinges. Detaching the seat provides easy access to the top and bottom, as well as the hinges and mounting points. These areas are difficult to clean and can accumulate dirt when the toilet seat is in place.
Place the toilet seat in the bathtub.
After removing the seat, it can be placed in the bathtub. Fill the bathtub with enough warm water to completely submerge the toilet seat. Then, add approximately 100 grams of washing soda crystals to the water and mix thoroughly.
Soak for about four hours.
Now, completely immerse the toilet seat in this solution and leave it for about four hours. During this time, the hot water and washing soda will help loosen dirt, body oils, soap residue, and stains on the seat. This will reduce the effort required to clean the seat later.
Clean the hinges and corners.
After about four hours, remove the seat from the water. Spray antibacterial cleaner on it. Then, use an old toothbrush to clean the seat. Pay particular attention to the hinges, mounting points, and other small areas of the seat where dirt easily accumulates. A toothbrush can be used to remove dirt from the hinges and mounting points. Pre-soaking the seat in warm water and washing soda softens the accumulated dirt, making it easier to clean with a brush.
Wipe with a clean cloth
After cleaning with the brush, wipe the seat thoroughly with a clean cloth to remove any remaining dirt and cleaner residue. Allow the seat to dry completely and then reinstall it on the toilet.
No chlorine bleach needed
This method doesn't use chlorine bleach. Hot water and washing soda initially loosen dirt and stains, followed by a cleanup using an antibacterial cleaner and a brush.
Not every stain will be completely removed.
This method may not completely remove all stains. If the toilet seat's plastic has cracked or permanently discolored due to age, cleaning may not restore it. In this case, the seat may need to be replaced. If the toilet seat only has stubborn stains and accumulated dirt, this method can be used before replacing it. When cleaning, keep the toilet seat material and manufacturer's instructions in mind. Use very hot water and cleaning products with caution. Avoid mixing any cleaning chemicals with other cleaners.






