Cooler Use Tips: A cooler is an easy and inexpensive way to avoid the heat in summer. If the cooler is properly fitted, it can provide a chilly feeling even during the heat of summer.

Which mesh will be best for the cooler?

Cooler Use Tips: As temperatures rise in summer, household fans will fail. Only a cooler can withstand temperatures of 40-45 degrees. If the cooler is filled with water and run, it can provide winter-like coolness even in summer. These days, coolers are available in addition to grass-lined mesh, honeycomb-style mesh. Both have their own advantages and disadvantages. Today, we'll tell you which type of mesh will be best for your cooler.

Grass net

Until a few years ago, this mesh was the only thing used in coolers. If you have a cooler sitting at home for years, you'll likely see this mesh.

Advantages: Grass netting is inexpensive. Even if it needs to be replaced once or twice a season, it's not expensive. Furthermore, it provides instant cooling. It doesn't have any special design and gets wet quickly, providing quick access to cool air.

Disadvantages: Along with its advantages, there are also some disadvantages. The mesh is not durable and needs to be replaced every season. It cannot be cleaned, which causes dirt to accumulate and quickly lose its shape. If the mesh is too thin, it dries out quickly due to the heat, causing the cooler's air to heat up.

Honeycomb Style Lattice

This mesh is commonly found in modern, compact coolers. Made from cellulose paper, it has a beehive-like design. It offers several benefits.

Advantages: These are stronger than grass nets, so they don't need to be replaced every season. If you use clean water in the cooler, it will last for many years. Due to its unique design and material, once wet, the net stays wet for a longer period, providing greater cooling.

Disadvantages: It's more expensive than the grass mesh. It can clog quickly if salty water is used. It also develops a foul odor over prolonged use, making it difficult to breathe in the cooler's air. Fitting this mesh is also a bit tricky.